|
BESTCELLTM-CELLULOSE ETHER |
|
|
Introduction
|
|
HPMC ( Hydroxypropyl Methyl Cellulose)
HPMC is made from highly pure cotton - cellulose by reaction of etherification under alkaline conditions without any organs of animals, fat and other bioactive constituents.
MHEC (Methyl Hydroxyethyl Celluloe)
MHEC is made from highly pure cotton - cellulose by reaction of etherification under alkaline conditions without any organs of animals, fat and other bioactive constituents.
HEC (Hydroxyethyl Cellulose)
HEC, taking natural cellulose as the main raw material, is water soluble cellulose ether produced by as series of chemical reactions, belonging to nonionic cellulose ethers.
CMC ( Carboxy Methyl Cellulose)
CMC will heighten stability of emulsion polymerization system to evenly scatter the additives of pigment and filler, etc. into painting so as to impart it with good pigment adhesion effect. CMC can evidently improve latex painting’s viscosity, anti-splash and sag resistance of painting in order for enhancing painting’s workability.
|
|
|
Cement based plaster
|
Crack resistance after dry
Enough air contents
Smooth workability
Good wet-adhesion
|
High water retention
Strong anti-slip
Long open time
Effective cost
|
|
|
Tile adhesive
|
Creamy consistancy
Easy mixing
Good workability
Good wet-adhesion good water retention
|
Strong anti-slip
Good open time
High adhesion strength
Effective cost
|
|
|
Putty
|
Good workability
Good water Retention
Resistance
|
Good consistence
Good spreadability crack
Effective cost
|
|
|
Tile grouts and jointfillers
|
Good lubrication
Smooth surface
Good workability
|
Good strength
Stable at high temperature
Effective cost
|
|
|
Gypsum based plaster
|
Crack resistance after dry
Good consistence
Smooth working
Good leveling
|
No lump formation
Good spreadability
High water retention
Effective cost
|
|
|
Water based painting
|
Good in-can stability
Good leveling
Good workability
Good sag resistance
|
Good spatter resistance
Good spreadability
Effective cost
|
|
|
Detergent
|
Thickening
Storage stability
High compatibility with raw material
Adjustment consistency
|
|
|
|
|
|
|